|
|
Hardigg Flangemount Cases
Hardigg Flangemount Cases
are rotationally molded in rugged polyethylene with a
molded-in shelf to support your panel-mounted gear.
Threaded inserts in the flange allow easy panel fastening.
Options include an aluminum mounting panel as well as a
hinged aluminum panel in the case lid. All case hardware is
recessed to protect it from damage, and the durable
molded-in color can't be scratched away. rugged
twist-catches allow quick removal of lids, and thick
gasketing seals the case against rain and dust.
Flange Mount Sizes
|
Case
Part Number |
Approx. Inside
Dimensions |
|
Approx. Outside
Dimensions |
|
|
L |
W |
H |
Base |
Lid |
L |
W |
H |
LBS |
Ship |
|
AL1010-0904FM |
9.93 |
10.00 |
12.70 |
8.70 |
4.00 |
12.93 |
13.00 |
14.39 |
9.80 |
UPS |
|
AL1010-0905FM |
9.93 |
10.00 |
13.95 |
8.70 |
5.25 |
12.93 |
13.00 |
15.64 |
10.60 |
UPS |
|
CL1109-0303FM |
11.00 |
8.87 |
6.00 |
3.00 |
3.00 |
13.12 |
10.87 |
8.19 |
5.40 |
UPS |
|
AL1212-0404FM |
12.00 |
12.00 |
8.21 |
4.21 |
4.00 |
15.00 |
15.00 |
9.90 |
10.60 |
UPS |
|
AL1212-0405FM |
12.00 |
12.00 |
9.33 |
4.21 |
5.12 |
15.00 |
15.00 |
11.02 |
10.80 |
UPS |
|
AL1212-1505FM |
12.00 |
12.00 |
20.30 |
15.18 |
5.12 |
15.00 |
15.00 |
21.99 |
14.90 |
UPS |
|
AL1413-0505FM |
14.50 |
13.12 |
10.30 |
5.06 |
5.24 |
17.50 |
16.12 |
11.99 |
13.50 |
UPS |
|
AL1616-0504FM |
15.74 |
15.88 |
9.29 |
5.42 |
3.87 |
18.75 |
18.88 |
10.98 |
13.90 |
UPS |
|
AL1616-0505FM |
15.75 |
15.88 |
10.54 |
5.42 |
5.12 |
18.75 |
18.88 |
12.19 |
14.50 |
UPS |
|
CL1713-0403FM |
16.88 |
12.88 |
7.38 |
4.38 |
3.00 |
19.00 |
14.88 |
9.07 |
6.80 |
UPS |
|
CL1713-0408FM |
16.88 |
12.88 |
12.00 |
4.38 |
7.62 |
19.00 |
14.88 |
13.69 |
11.00 |
UPS |
|
AL1818-0603FM |
17.93 |
17.93 |
9.55 |
6.37 |
3.18 |
20.93 |
20.93 |
11.25 |
16.50 |
UPS |
|
AL2013-0403FM |
19.87 |
13.00 |
7.00 |
4.00 |
3.00 |
22.87 |
16.00 |
8.69 |
13.50 |
UPS |
|
AL2013-0903FM |
19.87 |
13.00 |
12.25 |
9.25 |
3.00 |
22.87 |
16.00 |
13.94 |
16.80 |
UPS |
|
AL2216-0505FM |
22.00 |
16.00 |
10.50 |
5.25 |
5.25 |
25.00 |
19.00 |
12.19 |
18.50 |
UPS |
|
AL2624-0805FM |
26.06 |
24.00 |
13.12 |
8.06 |
5.06 |
29.06 |
27.00 |
16.81 |
31.30 |
UPS |
|
AL3424-0804FM |
34.25 |
24.18 |
12.30 |
8.00 |
4.30 |
37.25 |
27.18 |
14.49 |
34.30 |
UPS |
|
AL3424-0805FM |
34.25 |
24.18 |
13.25 |
8.00 |
5.25 |
37.25 |
27.18 |
15.44 |
42.50 |
FRT |
CASE OPTIONS
Hardigg offers an especially broad range of
standard options for FlangeMount™ shipping
cases.
Airtight case system. This includes a PRV
(pressure relief valve) and gasketing hardware
to safely maintain correct pressure
differential.
All-catch. Case hinges are replaced with
wing/turn catch-strike pairs, allowing lid to be
completely removed. No charge for this option.
[Note: some cases available only as all-catch.]
Card holder. Metal holder for shipping-card
riveted to the exterior of case. Two sizes:
2-3/8" x 5-3/8" (60 x 136 mm) and 4" x 6" (102 x
152 mm).
Caster sets – removable or fixed. Available in
sets of four, these are attached with rugged
mounting hardware or with Hardigg’s FastClip™
mounting plate system.
Edge casters. These rugged caster assemblies are
installed along a bottom edge of a single lid
case to permit wheeled movement of the case in a
cart-like fashion. Each heavy-duty caster wheel
is in a durable cast aluminum housing uniquely
designed to resist impact and rough handling
abuse. Not available on all case sizes.
Humidity indicator. Indicates 20%, 30%, and 40%
relative humidity ranges. Three part face
changes color when inside humidity exceeds the
indicated level. As humidity decreases, the
indicator resets for future use. Recommended for
airtight cases only.
ID plates. I.A.W. MIL-P-15024, Type H, Style IV,
Size 10.4" x 4" x .020" (102 x 102 x 0.5 mm)
thick aluminum, fastener attached to your case.
Text font is News Gothic Bold.
Lifting/tie-down
rings. These welded rings provide hoisting and
tie-down attachment points with 2" diameter
clearance for hooks. They’re spring-loaded and
pivot 180° . Available in plated steel or
stainless steel.
Locking cable/hasp. Allows the case to be
padlocked shut. Cable is tamper-resistant
aircraft steel. [Padlock not included].
Reverse application. The orientation of the case
is reversed: the lid becomes the base and vice
versa. The lid has stacking indents instead of
stacking ribs. No charge for this option.
Stainless hardware. Recommended for applications
where the standard zinc-plate or zinc alloy
finishes are unsuitable, such as excessive
saltwater or chemical environments.
Stencil – epoxy or polyrollmark. Per
MIL-I-43553. Available in black, white, and
yellow, depending on the color of the case
itself. One ink color per case.
|
|
|
Advanced Packaging Group
214 Countrywood Road
Covington, TN 38019
Woman Owned, CCR Registered
Vendor
|
|
|
